Menu
Your Cart

A3967 EasyDriver

A3967 EasyDriver
A3967 EasyDriver
A3967 EasyDriver
A3967 EasyDriver
A3967 EasyDriver
6.15€
Ex Tax: 5.00€
  • Stock: 3
    3
  • Brand: Generic
  • Model: EasyDriver
  • Weight: 6.00g
  • pkg: 8.00cm x 5.00cm x 2.00cm
  • SKU: YXC090
27 sold
Product Views: 6784
1. The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0V to 5V pulse. (or 0V to 3.3V pulse if you solder SJ2 closed on the EasyDriver)
2. EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
3. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4, 6, or 8 wire stepper motors.
4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.cjmcu made.
Features:
1. MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
2. Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds
3. Compatible with 4, 6, and 8 wire stepper motors of any voltage
4. Adjustable current control from 150mA / phase to 750mA / phase
5.Not soldered

Write a review

Please login or register to review