Brand: Generic
Model: d1-battery-shield
XH2-2.54MM (Port 1) Connect to lithium Battery
(normal 3.3-4.2V)
Micro USB (Port 2) Charging port (normal 5V)
Green L..
2.71€
Ex Tax:2.20€
Brand: Generic
Model: L293D Motor Shield
This Shield is simply plugged on an Arduino Board and allows up to 4 DC motors, 2 stepper motors or 2 servo motors to co..
6.15€
Ex Tax:5.00€
Brand: AZ-Delivery
Model: esp32-adapter-plate
This is a Breakout Board for your ESP32..
4.06€
Ex Tax:3.30€
Brand: Generic
Model: HW-389
This base board is designed to ease the prototyping using NodeMCU V3
board (Lolin). It extends the GPIO of NodeMCU to ..
4.06€
Ex Tax:3.30€
Brand: Generic
Model: d1-shield-buzzer
Frequency: 1kHz-3kHz4 optional control pins (Default: D5)..
3.49€
Ex Tax:2.84€
Brand: Generic
Model: d1-shield-button
Shield with 12mm button switch (b3f-4055) for Wemos D1, Without cap, with male headers.button is on pin D3, this is olde..
2.89€
Ex Tax:2.35€
Brand: Generic
Model: D1-relay-shield
Relay module for Wemos D1 boards.This is old version of board, with IO on D1 pin..
3.20€
Ex Tax:2.60€
Brand: Generic
Model: DTH22-D1-mini-shield
DHT22 Shield for Wemos D1. The DHT22 is a simple, low-cost digital
temperature and humidity sensor. It uses a capaciti..
9.84€
Ex Tax:8.00€
Brand: Generic
Model: d1-mini-dual-base-shield
This accessory for the D1 mini and D1 Mini Pro makes it easier to use shields for the D1 All 16 pins are connected ..
2.83€
Ex Tax:2.30€
Brand: Generic
Model: ESP32-CAM-MB
This board contains what is 'missing' on esp32-cam module;micro-usb portCH340 serial to usb adapter, power regulator boo..
3.69€
Ex Tax:3.00€
Brand: Generic
Model: TinyRTC
DS1307 I2C real-time clock chip (RTC)24C32 32K I2C EEPROM memory
Socket for LIR2032 rechargeable lithium battery (not i..
3.69€
Ex Tax:3.00€
Out Of Stock
Brand: Generic
Model: esp8266-motorshield
This shield board routes four pins: D1, D2, D3, and D3, to control onboard L293D driver chip.Than can be used to d..
4.31€
Ex Tax:3.50€
Brand: Generic
Model: MAR1801
1.8-inch color screen,support 65K color display,display rich colors
128X160 resolution, clear display
Using the ..
14.76€
Ex Tax:12.00€
Out Of Stock
Brand: Generic
Model: MAR2406
This is snap-on module (shield) for Arduino Uno or boards with compatible pinout.2.4" LCD TFT display 240X320
Bright, 4..
17.00€
Ex Tax:13.82€
Brand: Generic
Model: d1-shield-microsd
Pinout:D5 (CLK)D6 (MISO)D7 (MOSI)D8 (CS)..
2.46€
Ex Tax:2.00€
Out Of Stock
Brand: Generic
Model: MSP1443
1.44-inch color screen,support 65K color display,display rich colors
128X128 resolution, clear display
Using the..
11.07€
Ex Tax:9.00€
Brand: Generic
Model: nano-screw-shield
This is a shield for the Arduino Nano that provides a screw terminal for
each pin. This shield creates a socket f..
3.25€
Ex Tax:2.64€
Brand: Generic
Model: nano-board
Dedicated Arduino Nano V3 I/O expansion board. Can be mounted on Arduino Uno too, like a shield after extra headers are ..
4.92€
Ex Tax:4.00€
Brand: Generic
Model: d1-shield-oled
Screen Size: 64x48 pixels (0.66” Across)
Operating Voltage: 3.3V
Driver IC: SSD1306
Interface: IIC(I2C)
IIC Address:..
6.46€
Ex Tax:5.25€
Brand: Generic
Model: Prototype Shield for UNO r3
Thanks to the Shield design is just placed on the Arduino UNO R3 and all the clones!
Easy wiring projects directly to t..
3.08€
Ex Tax:2.50€