Prototyping Shield for Arduino Uno R3 including the Breadboard

XH2-2.54MM (Port 1) Connect to lithium Battery (normal 3.3-4.2V) Micro USB (Port 2) Charging port (normal 5V) Green LED lights when charging is com..

This Shield is simply plugged on an Arduino Board and allows up to 4 DC motors, 2 stepper motors or 2 servo motors to control. As an H-bridge of the m..

This is a Breakout Board for your ESP32..

This base board is designed to ease the prototyping using NodeMCU V3 board (Lolin). It extends the GPIO of NodeMCU to header pins, which also incl..

Frequency: 1kHz-3kHz4 optional control pins (Default: D5)..

Shield with 12mm button switch (b3f-4055) for Wemos D1, Without cap, with male headers.button is on pin D3, this is older version of shield without pa..

This accessory for the D1 mini and D1 Mini Pro makes it easier to use shields for the D1 All 16 pins are connected one to one The board is s..

DS1307 I2C real-time clock chip (RTC)24C32 32K I2C EEPROM memory Socket for LIR2032 rechargeable lithium battery (not included) to keep RTC clock run..

This shield board routes four pins: D1, D2, D3, and D3,  to control onboard L293D driver chip.Than can be used to drive 2 DC motors, or one stepp..

1.8-inch color screen,support 65K color display,display rich colors 128X160 resolution, clear display Using the SPI serial bus, it only takes ..