this device can convince modern USB-C Chargers to provide higher voltages that legacy 5V.
supported Fast charge protocols: PD2.0/PD3.0, QC2.0/QC3.0, AFC
Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported)
Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output
Net weight: 2.9g
1. After adjusting the DIP switch, because there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.
2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.